|
|
 |
 |
 |
| ．電子用含浸型絕緣膠 |
| |
此產品乃包含主劑、硬化劑與稀釋劑等三液型之環氧樹脂絕緣材。適用於小型電子零件之塗裝、披覆,如電容器、電感器、線圈、電路基板,厚、薄膜電路…等等之含浸、塗裝、絕緣之應用。若以真空含浸作業,可有較長的可使用時間,具優良的外觀及良好的電器特性,且符合UL-94V0耐燃規格。 |
| ．Electronic Impregnated Insulating Cement |
| |
The product contains the triple epoxy resin materials, main agents, hardener, and diluents. Apply on filming and coating small electronic parts, such as capacitor, sensor, coil, circuit board, film circuit, and etc. with the effect of impregnation, insulation, and filming. Operated under vacuum impregnation may extend the longevity of the applied product with good appearance and electricity, as well as comply UL-94V0 fire-resistance standard. |
|
| |
| ．電子用單液型絕緣膠 |
| |
本產品由單液型高品質環氧樹脂製成使用方便常溫作業容易沒有損耗之虞若以加溫硬化(加溫至100℃,2小時),可以節省工時,且硬化後機械強度優異,電氣性能佳,可用於鐵蕊、變壓器、安定器…等等接著及絕緣之應用。 |
| ．Electric Monopox Insulating Cement |
| |
The product is made of high-qualified monopox epoxy resin material, which is user-friendly and can be used under the room temperature and offers low shrinkage. Harden the product with around 2 hours at 100°C can save the working hour, and enhance the machine strength plus the electricity. Apply on iron core, adaptor, and ballast as the adhesive and insulating material. |
|
| |
| ．電子用灌注型絕緣膠 |
| |
本產品是包含主劑與硬化劑之兩液型環氧樹脂絕緣材料,此配方專為高壓產品所設計,黏度適中易混合攪拌,易灌注與封填作業;硬化後有良好之物性,適用如:點火線圈、高壓產生器、特殊變壓器…等等電子零組件之絕緣、防潮、成型。 |
| ．Electronic Filling Insulating Cement |
| |
The product contains the duopox epoxy resin material, main agents and hardener, which is designed for high pressure product. With moderate viscosity that is easily mixed for filling and covering. After hardening, the physical property of the product gets more flexible and can be apply on fire coil, high-pressure adapter, and special adapter and so on as the insulating, water-resistance, shaping material. |
|
| >>TOP |
|
|
 |
 |
|
